A2S-30 LIQUID GHOST IMAGE LIQUID STAIN REMOVERProduct Code 
DescriptionThis ghost remover is a viscous liquid ghost/image stain remover. A2S-30 is designed for the removal of a variety of ink stains. Completely cleans mesh with cured ink stains with less noticeable odor and works better than most stain removers.
Before using, remove all ink residue and emulsion from the screen.
Brush product on the ink side of a wet screen. Agitate both sides of the screen with a brush or pad and then set aside for approximately 3 to 8 minutes.
High pressure water rinse, spraying from the bottom to the top, on the print side of the screen. Reverse screen and high pressure rinse. Allow screens to dry.
A corrosive cleaning agent developed for the textile industry for screens.
High maximum strength. Caustic so please follow appropriate health and safety guidelines.
A strong high pressure washer (165 barr) blast the screen. Wear suitable protective goggles and gloves.
WARNING: This is not a friendly chemical and is for industrial use only, DO NOT allow contact with eyes or skin. This Ghost remover liquid contains Sodium Hydroxide / Corrosive.
Write an online review and share your thoughts with other shoppers!