TRANSFER MELT ADHESIVE POWDER
DescriptionSold Per 1 Litre or 5 Litre
This adhesive powder is suitable with our cold peel or hot peel transfer paper. This is a fine grade powder, which makes it also suitable when transferring onto lycra and stretch garments.
Print your design onto the paper in mirror image, then you sprinkle transfer adhesive powder on to the print while it is still wet, then you set your heat press at 110 deg. Place the transfer paper onto the press, then place a frame made from 5mm cardboard on to the transfer paper. Close the press for 15 seconds, open the press and the transfer is finished you can store it or transfer it to any garment by increasing the temp of your heatpress to 155 deg. Place the garment onto the heatpress, place and position the transfer onto the garment then press for 20 seconds. Remove the garment allow the transfer to cool down then peel off.
Write an online review and share your thoughts with other shoppers!