Try it, you will love it!
-
Easy to use. Stays wet on the screen for days meaning no clogging and blocking the mesh after minutes like most waterbased inks
-
Available in 250ml, 500ml, 1 Litre, 5 Litre containers
-
Brilliant results for both lower and higher mesh counts. Even on the highest 100-120T meshes, you will find this ink is one of the easiest to use even if you are a novice, you will achieve a soft sublimation feel to the finish.
-
Water washable.
-
Cures at a temperature of 185°C. Flash dry at 10 seconds or to fully cure between 20-60 seconds, depending on colour.
-
Low Viscosity, low tack lightweight ink, less fatigue when printing.
-
Print Wet on wet.
-
Heat fix using just a domestic iron for 3 minutes at cotton temperature.
-
Iron directly over the print without smudging.
-
Solvent and Phthalate free.
-
Wash down using water and drain safe organic screenwash.
-
No need for dip tanks or strong chemicals. No odour!
-
Print onto textiles, un-coated paper, board and wood.
-
Recommended for use with One Coat Emulsion or Saati PHU Emulsion.
Customer reviews
Great Ink
Thought we would try the Hybrid inks, as Im trying to keep my shop as green as possible these days. Been testing and trying it for a couple months now and just did our first job over the weekend with fantastic results. The Opaque white gives is a beautiful solid print with crisp clear lines and a brilliant smooth, soft hand. I am sold on this stuff and will use it exclusively from now on.
Daniel Praught | A5 Signs & Print, Tamworth Staffordshire | July 2021